C-Wax is the opposite of our Ti-Wax and fills the grain of open woods such as Oak and Ash with a sumptuous black. After turning and sanding, and perhaps colouring, clean the grain with a brass brush (and sanding sealer, especially after colouring) and rub C-Wax deeply into the grain. Allow it to dry after wiping off any excess, then buff off leaving the surface clean and the grain filled and highlighted with the black wax. You can then lightly overcoat it with Hampshire Sheen Microcrystalline for an even brighter, tougher finish. The carnauba and microcrystalline waxes are tough and hard wearing. For use on decorative wood only. This How-To video for the Ti-Wax is a similar application process.
Hampshire Sheen products are not currently able to be shipped outside of the UK
For Use on Indoor Decorative Items Only. Contains hydrocarbons. To prevent the product drying out quickly, keep tin sealed when not in use. Store above 10 C (41F). Prevent from freezing. Flammable. No Smoking. Do not ingest. May cause drowsiness. Use only in a well ventilated area. Irritant to skin and eyes. Wear suitable personal protection. KEEP AWAY FROM CHILDREN
Use within 6 months of purchase